Manually Updating Firmware),

From QNAPedia
Revision as of 20:32, 12 October 2016 by Vayanga (talk | contribs) (Creating Manually Updating Firmware - link is dead, please send a working link with instruction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

<parsererror style="display: block; white-space: pre; border: 2px solid #c77; padding: 0 1em 0 1em; margin: 1em; background-color: #fdd; color: black">

This page contains the following errors:

error on line 1 at column 1969: Opening and ending tag mismatch: wbr line 0 and p

Below is a rendering of the page up to the first error.

</parsererror> Dear Tim Wu,

I've followed your instruction you send me via vayanga@gmail.com, the main issue is that my system does not stay up long enough to do any troubleshooting, I've removed all the disks, and reboot it, it goes as far as getting IP address details, then go back to looping reboot.

the link you sent me for manual update is a dead link. can you please provide a link where I can download the firmware plus instruction on how to do manual firmware update with NO disk inserted, I don't want to loose my data.

2. Please check if reupdate the NAS latest firmware again(use Manually Updating Firmware: https://wiki.qnap.com/wiki/Manually_Updating_Firmware), the NAS whether has rebooted problem?