Compatible/Incompatible UPS: Difference between revisions

From QNAPedia
Jump to navigation Jump to search
m (added new cyberpower model)
(Fixed messeduppedness...)
 
(7 intermediate revisions by 6 users not shown)
Line 1: Line 1:
<h2> Compatible UPS  </h2>
<table cellpadding="0" border="1" style="text-align: center;">


<tr>
&nbsp;
<th width="100"> Brand
</th>
<th width="100"> Model
</th>
<th width="100"> USB/SNMP
</th>
<th width="100"> NAS Model
</th>
<th width="80"> Firmware
</th>
<th width="100"> Reporter
</th>
<th width="80"> YYYY.MM
</th>
<th width="280"> Remark
</th></tr>
<tr>
<td> SALICRU
</td>
<td>
<p>SPS&#160;ONE 900
</p><p>900VA / 480W 230V
</p><p><br />
</p>
</td>
<td> USB
</td>
<td> 212P
</td>
<td> 4.05
</td>
<td> Captainslarty
</td>
<td> 2014.01
</td>
<td> Sees battery level, sees mains failure and actions your presets, nothing more needed, Great value Spanish company UPS. Should work on all Qnap models, all Salicru use same system I believe so good to go. Seem as good as APC to me. <br />
</td></tr>
<tr>
<td> MGE OPS
</td>
<td> Ellipse ASR 1500 USBS
</td>
<td> USB
</td>
<td> 419P, 409
</td>
<td> 3.1.1
</td>
<td> Qnapclub fr
</td>
<td> 2009.11
</td>
<td> -
</td></tr>
<tr>
<td> APC
</td>
<td> APC BACK-UPS CS 350VA 230V
</td>
<td> USB
</td>
<td>
<p>459P
</p><p>ts439pro
</p>
</td>
<td>
<p>3.2.2
</p><p>3.1.2 1001t
</p>
</td>
<td>
<p>Magebarf
</p><p>Benneton
</p>
</td>
<td>
<p>2010.01
</p><p>2010.07
</p>
</td>
<td> Detection working as it should. Still no power outage, so no actual function test yet.
</td></tr>
<tr>
<td> APC
</td>
<td> APC BACK-UPS ES 450VA 120V
</td>
<td> USB
</td>
<td> &lt;a href="TS-419P"&gt;TS-419P&lt;/a&gt;
</td>
<td> 3.2.5 Build 0409T
</td>
<td> &lt;a href="User%3AJim%20DeLaHunt"&gt;Jim DeLaHunt&lt;/a&gt;
</td>
<td> 2010.04
</td>
<td> 419P successfully detects APC Back-UPS ES 450 unit. On test of power cut (unplugging UPS), the TS-419P shuts down as directed by the &lt;a href="Administration%20interface"&gt;Administration interface&lt;/a&gt;. TS219P estimates 1h:14m battery life on UPS normally, but on power cut this estimate drops to about 34m.
</td></tr>
<tr>
<td> APC
</td>
<td> APC BACK-UPS ES 550VA 230V
</td>
<td> USB
</td>
<td>
<p>219P<br />
</p><p>419P
</p>
</td>
<td>
<p>3.1.1<br />
</p><p>3.1.1
</p>
</td>
<td>
<p>Colinr990
</p><p>NCGrimbo
</p>
</td>
<td>
<p>2009.12
</p><p>2010.02
</p>
</td>
<td> Automatically detected by 419P. Gives 28 minutes, 7 seconds as the estimated battery life for the 419P.
</td></tr>
<tr>
<td> APC
</td>
<td> APC UPS BE-700-IT
</td>
<td> USB
</td>
<td> 119
</td>
<td> 3.1.2
</td>
<td> User
</td>
<td> 2009.12
</td>
<td> -
</td></tr>
<tr>
<td> APC
</td>
<td> APC BACK-UPS CS-650-VA
</td>
<td> USB
</td>
<td> 509
</td>
<td> 3.2.0
</td>
<td> OMDB
</td>
<td> 2010.01
</td>
<td>
<p>400 Watts.<br />Supplier Part No.: BK650-AS<br />Supplier Part Description: BK650VA 230V ASEAN<br />&lt;a href="<a href="http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS" alt="http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS" title="http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS">http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS</a>" alt="<a href="http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS" alt="http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS" title="http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS">http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS</a>" title="<a href="http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS" alt="http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS" title="http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS">http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS</a>"&gt;Official APC link&lt;/a&gt;<br />Works as advertised on TS-509 Pro. Remember to charge the battery first (8hrs as recommended by APC) before plugging it in and try using top left USB port (if it doesn't show up in the admin panel)
</p>
</td></tr>
<tr>
<td> APC
</td>
<td> APC Back-UPS RS 550 LCD 550 Master Control (BR550GI)
</td>
<td> USB
</td>
<td>
<p>239 Pro
</p><p><br />
</p><p>TS-259 Pro
</p><p><br />
</p><p>TS-219P
</p>
</td>
<td>
<p>3.2.1 Build 1231
</p><p>3.3.3 Build 0928
</p><p>3.3.9 Build 0120T
</p>
</td>
<td>
<p>Eduardo
</p><p><br />
</p><p>Okulove
</p><p><br />
</p><p>plexman
</p>
</td>
<td>
<p>2010.01
</p><p><br />
</p><p>2010.10
</p><p><br />
</p><p>2011.02
</p>
</td>
<td>
<p>–
</p><p>–
</p><p>219P detects unit automatically, reported battery life is 38 minutes (connected: TS-219P w/2HDDs Samsung EcoGreen F4, Netgear WNDR3700 WiFi-Router, external WD USB HDD, cable modem, DECT phone)
</p><p><br />
</p>
</td></tr>
<tr>
<td> APC<span class="Apple-tab-span" style="white-space:pre"> </span>
</td>
<td> APC Back-UPS Pro 900 (BR900GI)
</td>
<td> USB
</td>
<td>
<p>TS-439 Pro<br />
</p>
</td>
<td>
<p>3.4.2<br />
</p>
</td>
<td>
<p>Stephen<br />
</p>
</td>
<td>
<p>2011.05<br />
</p>
</td>
<td>
<p>Detected, model reported fine. &#160;NAS has&#160;4 x 1.5TB drives in RAID 5 and reports 153 minutes available on battery. &#160;I have added 8-port HP&#160;network switch and ADSL router to UPS and reported time is 128 minutes. &#160;Times as displayed on UPS LCD display.
</p><p>UPS Brand,&#160;Model, Power Status, Battery level and time remaining all reported inside QNAP UI (2Hr 08Min).<br />
</p>
</td></tr>
<tr>
<td> APC
</td>
<td> APC Back-UPS Pro 900 (BR900GI)
</td>
<td> USB
</td>
<td> TS-259 Pro+
</td>
<td> 3.3.9 Build 0104T
</td>
<td> Garvs
</td>
<td> 2011.08
</td>
<td>
<p>Works fine, did a test turning power off at wall to the UPS and the TS-259 Pro+ NAS turned off 5 minutes later as setup without problem after running on the UPS battery.
</p>
</td></tr>
<tr>
<td> Cyberpower
</td>
<td> VALUE 800EI-AU 800VA / 480W Line Interactive (Tower)
</td>
<td> USB
</td>
<td> TS669-L
</td>
<td> 4.1.0 Build 20131220
</td>
<td> marshalleq
</td>
<td> 2014.01.10
</td>
<td> NAS is detected correctly shortly after USB cable plugged in. Remaining battery correctly displays, autoprotection and restart works correctly.
<p><br />
</p><p><br />
</p>
</td></tr>
<tr>
<td> CyberPower
</td>
<td> CP1350AVRLCD 1350 VA 810 Watts
</td>
<td> USB
</td>
<td> 809
</td>
<td> 3.2.3
</td>
<td> Raisdead
</td>
<td> 2010.02
</td>
<td> Reports in the Admin Panel with correct information. No power failure yet...
</td></tr>
<tr>
<td> CyberPower<br />
</td>
<td> DX800E-DE<br />
</td>
<td> USB<br />
</td>
<td> TS-659 Pro II<br />
</td>
<td> 3.5.2 Build 1126T<br />
</td>
<td> foxbox<br />
</td>
<td> 2012.01<br />
</td>
<td>
<p>Reports correctly and both regular shutdown and 'auto-proection' mode works as intended.
</p>
</td></tr></table>
<p><br />
</p>
<h2> Incompatible UPS  </h2>
<table cellpadding="0" border="1" style="text-align: center;">


<tr>
== Compatible UPS ==
<th width="100"> Brand
 
</th>
{| style="text-align: center" cellpadding="0" border="1"
<th width="100"> Model
|-
</th>
! width="100" | Brand
<th width="100"> USB/SNMP
! width="100" | Model
</th>
! width="100" | USB/SNMP
<th width="100"> NAS Model
! width="100" | NAS Model
</th>
! width="80" | Firmware
<th width="80"> Firmware
! width="100" | Reporter
</th>
! width="80" | YYYY.MM
<th width="100"> Reporter
! width="280" | Remark
</th>
|-
<th width="80"> YYYY.MM
| SALICRU
</th>
|
<th width="280"> Remark
SPS&nbsp;ONE 900
</th></tr>
 
<tr>
900VA / 480W 230V
<td> Belkin
 
</td>
&nbsp;
<td> Any
 
</td>
| USB
<td>
| 212P
</td>
| 4.05
<td> Any
| Captainslarty
</td>
| 2014.01
<td> Any
| Sees battery level, sees mains failure and actions your presets, nothing more needed, Great value Spanish company UPS. Should work on all Qnap models, all Salicru use same system I believe so good to go. Seem as good as APC to me.
</td>
|-
<td>
| SALICRU
</td>
| SPS ONE 700
<td>
| USB
</td>
| TS-231P2
<td>
| 4.4.3.1439
<p><br />
| WickedChild
</p>
| 2020.10
</td></tr></table>
| Works great, the only thing missing is it won't report the estimated protection time in the QTS UPS Settings.
<p><br />
|-
</p><p><br />
| MGE OPS
</p><p><b>Unedited Copy from original '</b><i>&lt;a href="User%20Reported%20Compatible%20Uninterruptible%20Power%20Supplies"&gt;User Reported Compatible Uninterruptible Power Supplies&lt;/a&gt;&#160;'</i><b>page</b>
| Ellipse ASR 1500 USBS
</p>
| USB
<blockquote></blockquote>
| 419P, 409
<h1> UPSes known to be working with QNAP NASes  </h1>
| 3.1.1
<p><i>Updated 24/03/09</i>
| Qnapclub fr
</p>
| 2009.11
<div><br /></div><div>The following is a list of various UPSes that have been reported as working by users at the&#160;&lt;a href="<a href="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" alt="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" title="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181">http://forum.qnap.com/viewtopic.php?f=23&amp;t=181</a>" alt="<a href="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" alt="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" title="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181">http://forum.qnap.com/viewtopic.php?f=23&amp;t=181</a>" title="<a href="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" alt="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" title="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181">http://forum.qnap.com/viewtopic.php?f=23&amp;t=181</a>"&gt;UPS Compatibility List topic&lt;/a&gt;&#160;at the &lt;a href="<a href="http://forum.qnap.com/" alt="http://forum.qnap.com/" title="http://forum.qnap.com/">http://forum.qnap.com/</a>" alt="<a href="http://forum.qnap.com/" alt="http://forum.qnap.com/" title="http://forum.qnap.com/">http://forum.qnap.com/</a>" title="<a href="http://forum.qnap.com/" alt="http://forum.qnap.com/" title="http://forum.qnap.com/">http://forum.qnap.com/</a>"&gt;QNAP Forum&lt;/a&gt;. &#160;Particularly with APC UPSes, some of the UPSes have changed over time but retained the same model number, so it's important to check the SKU which uniquely identifies each model. &#160;Models listed in the&#160;&lt;a href="<a href="http://www.qnap.com/pro_compatibility_ups.asp" alt="http://www.qnap.com/pro_compatibility_ups.asp" title="http://www.qnap.com/pro_compatibility_ups.asp">http://www.qnap.com/pro_compatibility_ups.asp</a>" alt="<a href="http://www.qnap.com/pro_compatibility_ups.asp" alt="http://www.qnap.com/pro_compatibility_ups.asp" title="http://www.qnap.com/pro_compatibility_ups.asp">http://www.qnap.com/pro_compatibility_ups.asp</a>" title="<a href="http://www.qnap.com/pro_compatibility_ups.asp" alt="http://www.qnap.com/pro_compatibility_ups.asp" title="http://www.qnap.com/pro_compatibility_ups.asp">http://www.qnap.com/pro_compatibility_ups.asp</a>"&gt;Official QNAP UPS Compatibility List&lt;/a&gt;&#160;are included below for completeness.</div><div>&#160;</div><div></div><div></div><div>If neither your NAS model&#160;nor the APC UPS model you are interested are listed, there's a strong possibility it still may work. &#160;You are best advised either to ask in the&#160;&lt;a href="<a href="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" alt="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" title="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181">http://forum.qnap.com/viewtopic.php?f=23&amp;t=181</a>" alt="<a href="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" alt="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" title="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181">http://forum.qnap.com/viewtopic.php?f=23&amp;t=181</a>" title="<a href="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" alt="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181" title="http://forum.qnap.com/viewtopic.php?f=23&amp;t=181">http://forum.qnap.com/viewtopic.php?f=23&amp;t=181</a>"&gt;UPS topic at the QNAP Forum&lt;/a&gt;&#160;or contact&#160;&lt;a href="<a href="http://www.qnap.com/onlinesupport.asp" alt="http://www.qnap.com/onlinesupport.asp" title="http://www.qnap.com/onlinesupport.asp">http://www.qnap.com/onlinesupport.asp</a>" alt="<a href="http://www.qnap.com/onlinesupport.asp" alt="http://www.qnap.com/onlinesupport.asp" title="http://www.qnap.com/onlinesupport.asp">http://www.qnap.com/onlinesupport.asp</a>" title="<a href="http://www.qnap.com/onlinesupport.asp" alt="http://www.qnap.com/onlinesupport.asp" title="http://www.qnap.com/onlinesupport.asp">http://www.qnap.com/onlinesupport.asp</a>"&gt;QNAP Online Support&lt;/a&gt;&#160;directly before purchase.</div><div></div><div></div><div>Being linux based, QNAP&#160;software connects with usb-hid compatible UPS&#160;devices.&#160; When looking for a UPS check if the UPS&#160;device supports usb-hid.&#160; Usb-hid is also what Mac computers require to connect to UPS which may be an indication as to it's compatibility.&#160; To make doubly sure, ensure your QNAP NAS supports usb-hid, such as the TS-669-L listed under UPS support at the bottom of the page &lt;a href="<a href="http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788" alt="http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788" title="http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788">http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788</a>" alt="<a href="http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788" alt="http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788" title="http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788">http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788</a>" title="<a href="http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788" alt="http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788" title="http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788">http://www.qnap.com/en/index.php?sn=822&amp;c=351&amp;sc=513&amp;t=518&amp;n=9788</a>"&gt;here&lt;/a&gt;.&#160; The Cyberpower information on usb-hid for their devices is located &lt;a href="<a href="http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html" alt="http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html" title="http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html">http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html</a>" alt="<a href="http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html" alt="http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html" title="http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html">http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html</a>" title="<a href="http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html" alt="http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html" title="http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html">http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html</a>"&gt;here&lt;/a&gt;.</div><div></div><div>More specific compatibility can be found on the usb-hid projects lookup page &lt;a href="<a href="http://www.networkupstools.org/stable-hcl.html" alt="http://www.networkupstools.org/stable-hcl.html" title="http://www.networkupstools.org/stable-hcl.html">http://www.networkupstools.org/stable-hcl.html</a>" alt="<a href="http://www.networkupstools.org/stable-hcl.html" alt="http://www.networkupstools.org/stable-hcl.html" title="http://www.networkupstools.org/stable-hcl.html">http://www.networkupstools.org/stable-hcl.html</a>" title="<a href="http://www.networkupstools.org/stable-hcl.html" alt="http://www.networkupstools.org/stable-hcl.html" title="http://www.networkupstools.org/stable-hcl.html">http://www.networkupstools.org/stable-hcl.html</a>"&gt;here&lt;/a&gt;.</div>
| -
<p><br />
|-
</p>
| APC
<table width="80%" cellspacing="0" cellpadding="3" border="1" align="center" summary="UPSes known to be working with QNAP NASes" style="background-color: white; margin: 0px 0px 0px 5px; color: black; font-size: 100%">
| APC BACK-UPS CS 350VA 230V
<caption> <b><font size="+1">Working UPSes</font></b><br /><br />
| USB
</caption>
|
<tr>
459P
<td bgcolor="#66ccff">
 
<p><i><b>Brand</b></i>
ts439pro
</p>
 
</td>
|
<td bgcolor="#66ccff">
3.2.2
<p><i><b>SKU</b></i>
 
</p>
3.1.2 1001t
</td>
 
<td bgcolor="#66ccff">
|
<p><i><b>Model</b></i>
Magebarf
</p>
 
</td>
Benneton
<td bgcolor="#66ccff">
 
<p><i><b>NAS</b></i>
|
</p>
2010.01
</td>
 
<td bgcolor="#66ccff">
2010.07
<p><i><b>Notes</b></i>
 
</p>
| Detection working as it should. Still no power outage, so no actual function test yet.
</td></tr>
|-
<tr>
| APC
<td> APC
| APC BACK-UPS ES 450VA 120V
</td>
| USB
<td> SUA1000XLI
| TS-419P
</td>
| 3.2.5 Build 0409T
<td> Smart-UPS 1000XLI
| Jim DeLaHunt
</td>
| 2010.04
<td> TS-639 Pro
| 419P successfully detects APC Back-UPS ES 450 unit. On test of power cut (unplugging UPS), the TS-419P shuts down as directed by the Administration interface. TS-419P estimates 1h:14m battery life on UPS normally, but on power cut this estimate drops to about 34m.
</td>
|-
<td>
| APC
</td></tr>
| APC BACK-UPS ES 550VA 230V
<tr>
| USB
<td> APC
|
</td>
219P
<td> BK350EI
 
</td>
419P
<td> Back-UPS CS 350
 
</td>
|
<td> TS-109, TS-209 Pro, TS-209 PRO II, TS-219P, TS-409 Pro
3.1.1
</td>
 
<td> &#160;
3.1.1
</td></tr>
 
<tr>
|
<td> APC
Colinr990
</td>
 
<td> BK500EI
NCGrimbo
</td>
 
<td> Back-UPS CS 500
|
</td>
2009.12
<td> TS-109 Pro, TS-209 Pro, TS-439 Pro, TS-509 Pro, TS-639 Pro
 
</td>
2010.02
<td> &#160;
 
</td></tr>
| Automatically detected by 419P. Gives 28 minutes, 7 seconds as the estimated battery life for the 419P.
<tr>
|-
<td> APC
| APC
</td>
| APC UPS BE-700-IT
<td> BK650EI
| USB
</td>
| 119
<td> Back-UPS CS 650
| 3.1.2
</td>
| User
<td> TS-439 Pro
| 2009.12
</td>
| -
<td>
|-
</td></tr>
| APC
<tr>
| APC BACK-UPS CS-650-VA
<td> APC
| USB
</td>
| TS-509
<td> BF350
| 3.2.0
</td>
| OMDB
<td> Back-UPS ES 350
| 2010.01
</td>
|
<td> TS-209 Pro
400 Watts.<br/> Supplier Part No.: BK650-AS<br/> Supplier Part Description: BK650VA 230V ASEAN<br/> [http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650-AS http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS]
</td>
 
<td> &#160;
Works as advertised on TS-509 Pro. Remember to charge the battery first (8hrs as recommended by APC) before plugging it in and try using top left USB port (if it doesn't show up in the admin panel)
</td></tr>
 
<tr>
|-
<td> APC
| APC
</td>
| APC Back-UPS RS 550 LCD 550 Master Control (BR550GI)
<td> BF500
| USB
</td>
|
<td> Back-UPS ES 500
239 Pro
</td>
 
<td> TS-209
&nbsp;
</td>
 
<td> &#160;
TS-259 Pro
</td></tr>
 
<tr>
&nbsp;
<td> APC
 
</td>
TS-219P
<td> BE450G
 
</td>
|
<td> Back-UPS ES 450VA
3.2.1 Build 1231
</td>
 
<td> TS-509 Pro<br />
3.3.3 Build 0928
</td>
 
<td> &#160;
3.3.9 Build 0120T
</td></tr>
 
<tr>
|
<td> APC
Eduardo
</td>
 
<td> BE550
&nbsp;
</td>
 
<td> Back-UPS ES 550VA
Okulove
</td>
 
<td> TS-109, TS-109 Pro, TS-209, TS-409 Pro, TS-509 Pro<br />
&nbsp;
</td>
 
<td> &#160;
plexman
</td></tr>
 
<tr>
|
<td> APC
2010.01
</td>
 
<td> BE700
&nbsp;
</td>
 
<td> Back-UPS ES 700VA
2010.10
</td>
 
<td> TS-109, TS-209, TS-209 II
&nbsp;
</td>
 
<td>
2011.02
<p>&#160;
 
</p>
|
</td></tr>
<tr>
 
<td> APC
</td>
 
<td> BR500I
219P detects unit automatically, reported battery life is 38 minutes (connected: TS-219P w/2HDDs Samsung EcoGreen F4, Netgear WNDR3700 WiFi-Router, external WD USB HDD, cable modem, DECT phone)
</td>
 
<td> Back-UPS RS 500VA
&nbsp;
</td>
 
<td> TS-209 Pro
|-
</td>
| APC
<td> &#160;
| APC Back-UPS Pro 900 (BR900GI)
</td></tr>
| USB
<tr>
|
<td> APC
TS-439 Pro
</td>
 
<td> BR550GI
|
</td>
3.4.2
<td> Back-UPS RS 550VA
 
</td>
|
<td> TS-239 Pro
Stephen
</td>
 
<td>
|
</td></tr>
2011.05
<tr>
 
<td> APC
|
</td>
Detected, model reported fine. &nbsp;NAS has&nbsp;4 x 1.5TB drives in RAID 5 and reports 153 minutes available on battery. &nbsp;I have added 8-port HP&nbsp;network switch and ADSL router to UPS and reported time is 128 minutes. &nbsp;Times as displayed on UPS LCD display.
<td> BR800I
 
</td>
UPS Brand,&nbsp;Model, Power Status, Battery level and time remaining all reported inside QNAP UI (2Hr 08Min).
<td> Back-UPS RS 800VA
 
</td>
|-
<td> TS-509 Pro, TS-639 Pro
| APC
</td>
| APC Back-UPS Pro 900 (BR900GI)
<td> &#160;
| USB
</td></tr>
| TS-259 Pro+
<tr>
| 3.3.9 Build 0104T
<td> APC
| Garvs
</td>
| 2011.08
<td> BT1000
|
</td>
Works fine, did a test turning power off at wall to the UPS and the TS-259 Pro+ NAS turned off 5 minutes later as setup without problem after running on the UPS battery.
<td> Back-UPS HT 1000
 
</td>
|-
<td> TS-439 Pro
| Cyberpower
</td>
| VALUE 800EI-AU 800VA / 480W Line Interactive (Tower)
<td>
| USB
</td></tr>
| TS669-L
<tr>
| 4.1.0 Build 20131220
<td> APC
| marshalleq
</td>
| 2014.01.10
<td> BX900
| NAS is detected correctly shortly after USB cable plugged in. Remaining battery correctly displays, autoprotection and restart works correctly.  
</td>
&nbsp;
<td> Back-UPS XS 900VA
 
</td>
&nbsp;
<td> TS-209 Pro
 
</td>
|-
<td> &#160;
| CyberPower
</td></tr>
| CP1350AVRLCD 1350 VA 810 Watts
<tr>
| USB
<td> APC
| 809
</td>
| 3.2.3
<td> BX900R
| Raisdead
</td>
| 2010.02
<td> Back-UPS XS 900VA
| Reports in the Admin Panel with correct information. No power failure yet...
</td>
|-
<td> TS-209, TS-209 Pro, TS-209 Pro II
| CyberPower
</td>
|
<td> &#160;
CP1500PFCLCD<br/> PFC SINE WAVE UPS<br/> 1500VA / 1000W
</td></tr>
 
<tr>
| USB
<td> APC
|
</td>
TVS-682<br/> TS-453 Pro
<td> BX1200
 
</td>
| 4.4.2.1270
<td> Back-UPS XS 1200VA
| Mtburgard
</td>
| 2020.05
<td> TS-209 Pro
|
</td>
Have three (3) NAS systems:&nbsp; 2 - TVS-682 and 1 - TS-453 Pro<br/> Connected one of the TVS-682 to the UPS via USB cable; it was sensed automatically.&nbsp;<br/> Configured this device as the UPS Master and the other two NAS systems as Slaves and all three now report a connection to the UPS.&nbsp; This has been tested twice since setting this up.&nbsp; All systems shutdown gracefully as expected.
<td> &#160;
 
</td></tr>
[https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1500pfclcd/ https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1500pfclcd/]
<tr>
 
<td> APC
|-
</td>
| CyberPower
<td> BX1300LCD
| DX800E-DE
</td>
| USB
<td> Back-UPS XS 1300VA LCD
| TS-659 Pro II
</td>
| 3.5.2 Build 1126T
<td> TS-509 Pro
| foxbox
</td>
| 2012.01
<td>
|
</td></tr>
Reports correctly and both regular shutdown and 'auto-proection' mode works as intended.
<tr>
 
<td> APC
|-
</td>
| Belkin
<td> SU700
| F6C1500-TW-RK
</td>
| USB
<td> SMART-UPS 700VA<br />
| TS-453Be
</td>
| 4.4.2.1270
<td> TS-109, TS-109 Pro, TS 209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro
| ecoen
</td>
| 2020.05
<td> 1
| Manufacturer is correct, Model is detected as Belkin UPS.&nbsp; Battery capacity indicates full charge, but I have a few things plugged into it and it shows 2 minutes of protection.&nbsp; I haven't tested auto shutdown yet.
</td></tr>
|}
<tr>
 
<td> APC
&nbsp;
</td>
 
<td> SU725
== Incompatible UPS ==
</td>
 
<td> SMART-UPS 725VA<br />
{| style="text-align: center" cellpadding="0" border="1"
</td>
|-
<td> TS-419+ Pro
! width="100" | Brand
</td>
! width="100" | Model
<td> 1
! width="100" | USB/SNMP
</td></tr>
! width="100" | NAS Model
<tr>
! width="80" | Firmware
<td> APC
! width="100" | Reporter
</td>
! width="80" | YYYY.MM
<td> SUA750
! width="280" | Remark
</td>
|-
<td> SMART-UPS 750
| Belkin
</td>
| Many
<td> TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro
| &nbsp;
</td>
| Any
<td> 1
| Any
</td></tr>
| &nbsp;
<tr>
| &nbsp;
<td> APC
|
</td>
&nbsp;
<td> SUA1000
 
</td>
|}
<td> SMART-UPS 1000i
 
</td>
&nbsp;
<td> TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS 809 Pro
 
</td>
&nbsp;
<td> 1,2
 
</td></tr>
'''Unedited Copy from original ''''''<a href="User%20Reported%20Compatible%20Uninterruptible%20Power%20Supplies">User Reported Compatible Uninterruptible Power Supplies</a>&nbsp;''''''page'''
<tr>
<blockquote>
<td> APC
&nbsp;
</td>
</blockquote>
<td> SUA1500
 
</td>
= UPSes known to be working with QNAP NASes =
<td> SMART-UPS 1500VA
 
</td>
''Updated 24/03/09, Fixed bad formatting 05/05/21 (!!)''
<td> TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-209 Pro II, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro<br />
 
</td>
The following is a list of various UPSes that have been reported as working by users at the [http://forum.qnap.com/viewtopic.php?f=23&t=181 UPS Compatibility List topic] at the [http://forum.qnap.com/ QNAP Forum].
<td> 1<br />
 
</td></tr>
Particularly with APC UPSes, some of the UPSes have changed over time but retained the same model number, so it's important to check the SKU which uniquely identifies each model. Models listed in the [http://www.qnap.com/pro_compatibility_ups.asp Official QNAP UPS Compatibility List] are included below for completeness.
<tr>
 
<td> APC
If neither your NAS model nor the APC UPS model you are interested are listed, there's a strong possibility it still may work. You are best advised either to ask in the [http://forum.qnap.com/viewtopic.php?f=23&t=181 UPS topic at the QNAP Forum] or contact [http://www.qnap.com/onlinesupport.asp QNAP Online Support] directly before purchase.
</td>
 
<td> SUA3000
Being linux based, QNAP software connects with usb-hid compatible UPS devices. When looking for a UPS check if the UPS device supports usb-hid. Usb-hid is also what Mac computers require to connect to UPS which may be an indication as to its compatibility. To make doubly sure, ensure your QNAP NAS supports usb-hid, such as the TS-669-L listed under UPS support at the bottom of the page [http://www.qnap.com/en/index.php?sn=822&c=351&sc=513&t=518&n=9788 here]. The Cyberpower information on usb-hid for their devices is located [http://www.cyberpowersystems.com/support/faqs/pp-compatibility.html here]. More specific compatibility can be found on the usb-hid projects lookup page [http://www.networkupstools.org/stable-hcl.html here]. &nbsp;
</td>
 
<td> SMART-UPS 3000VA
{| align="center" border="1" cellpadding="3" cellspacing="0" style="background-color: white; margin: 0px 0px 0px 5px; color: black; font-size: 100%" summary="UPSes known to be working with QNAP NASes" width="80%"
</td>
|+ '''<font size="+1">Working UPSes</font>'''<br/> &nbsp;
<td> TS-639 Pro
|-
</td>
| bgcolor="#66ccff" |
<td> 2
'''''Brand'''''
</td></tr>
 
<tr>
| bgcolor="#66ccff" |
<td> CyberPower
'''''SKU'''''
</td>
 
<td>
| bgcolor="#66ccff" |
</td>
'''''Model'''''
<td> CP725AVRLCD(JP)
 
</td>
| bgcolor="#66ccff" |
<td> TS-459pro
'''''NAS'''''
</td>
 
<td> 1
| bgcolor="#66ccff" |
</td></tr>
'''''Notes'''''
<tr>
 
<td> CyberPower
|-
</td>
| APC
<td>
| SUA1000XLI
</td>
| Smart-UPS 1000XLI
<td> CP850AVRLCD
| TS-639 Pro
</td>
| &nbsp;
<td> TS-109 II
|-
</td>
| APC
<td> 3
| BK350EI
</td></tr>
| Back-UPS CS 350
<tr>
| TS-109, TS-209 Pro, TS-209 PRO II, TS-219P, TS-409 Pro
<td> CyberPower
| &nbsp;
</td>
|-
<td>
| APC
</td>
| BK500EI
<td> CP1350EAVRLCD
| Back-UPS CS 500
</td>
| TS-109 Pro, TS-209 Pro, TS-439 Pro, TS-509 Pro, TS-639 Pro
<td> TS-639 PRO
| &nbsp;
</td>
|-
<td>
| APC
</td></tr>
| BK650EI
<tr>
| Back-UPS CS 650
<td> MGE
| TS-439 Pro
</td>
| &nbsp;
<td> &#160;
|-
</td>
| APC
<td> Ellipse Premium 500
| BF350
</td>
| Back-UPS ES 350
<td> TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro
| TS-209 Pro
</td>
| &nbsp;
<td> 1
|-
</td></tr>
| APC
<tr>
| BF500
<td> MGE
| Back-UPS ES 500
</td>
| TS-209
<td>
| &nbsp;
</td>
|-
<td> EM 600
| APC
</td>
| BE450G
<td> TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-800U-PR, TS-809 Pro
| Back-UPS ES 450VA
</td>
| TS-509 Pro
<td> 1
| &nbsp;
</td></tr>
|-
<tr>
| APC
<td valign="top">
| BE550
<p>&#160;
| Back-UPS ES 550VA
</p><p>Notes:
| TS-109, TS-109 Pro, TS-209, TS-409 Pro, TS-509 Pro
</p>
| &nbsp;
</td>
|-
<td colspan="4">
| APC
<p>&#160;
| BE700
</p><p><i>1. Appears on the Official QNAP UPS Compatibility List</i>
| Back-UPS ES 700VA
</p><p><i>2. SNMP feature reported to be not workin</i>g
| TS-109, TS-209, TS-209 II
</p><p><i>3. From V3.0.0 Build 0121T firmware</i>
|
</p><p><br />
&nbsp;
</p>
 
</td></tr></table>
|-
<p>&lt;/blockquote&gt;
| APC
</p><span class="fck_mw_category">Compatibility</span>
| BR500I
| Back-UPS RS 500VA
| TS-209 Pro
| &nbsp;
|-
| APC
| BR550GI
| Back-UPS RS 550VA
| TS-239 Pro
| &nbsp;
|-
| APC
| BR800I
| Back-UPS RS 800VA
| TS-509 Pro, TS-639 Pro
| &nbsp;
|-
| APC
| BT1000
| Back-UPS HT 1000
| TS-439 Pro
| &nbsp;
|-
| APC
| BX900
| Back-UPS XS 900VA
| TS-209 Pro
| &nbsp;
|-
| APC
| BX900R
| Back-UPS XS 900VA
| TS-209, TS-209 Pro, TS-209 Pro II
| &nbsp;
|-
| APC
| BX1200
| Back-UPS XS 1200VA
| TS-209 Pro
| &nbsp;
|-
| APC
| BX1300LCD
| Back-UPS XS 1300VA LCD
| TS-509 Pro
| &nbsp;
|-
| APC
| SU700
| SMART-UPS 700VA
| TS-109, TS-109 Pro, TS 209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro
| 1
|-
| APC
| SU725
| SMART-UPS 725VA
| TS-419+ Pro
| 1
|-
| APC
| SUA750
| SMART-UPS 750
| TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro
| 1
|-
| APC
| SUA1000
| SMART-UPS 1000i
| TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS 809 Pro
| 1,2
|-
| APC
| SUA1500
| SMART-UPS 1500VA
| TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-209 Pro II, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro
| 1
|-
| APC
| SUA3000
| SMART-UPS 3000VA
| TS-639 Pro
| 2
|-
| CyberPower
| &nbsp;
| CP725AVRLCD(JP)
| TS-459pro
| 1
|-
| CyberPower
| &nbsp;
| CP850AVRLCD
| TS-109 II
| 3
|-
| CyberPower
| &nbsp;
| CP1350EAVRLCD
| TS-639 PRO
| &nbsp;
|-
| MGE
| &nbsp;
| Ellipse Premium 500
| TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro
| 1
|-
| MGE
| &nbsp;
| EM 600
| TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-800U-PR, TS-809 Pro
| 1
|-
| valign="top" |
&nbsp;
 
Notes:
 
| colspan="4" |
&nbsp;
 
''1. Appears on the Official QNAP UPS Compatibility List''
 
''2. SNMP feature reported to be not workin''g
 
''3. From V3.0.0 Build 0121T firmware''
 
&nbsp;
 
|}
  [[Category:Compatibility]]

Latest revision as of 17:50, 5 May 2021

 

Compatible UPS

Brand Model USB/SNMP NAS Model Firmware Reporter YYYY.MM Remark
SALICRU

SPS ONE 900

900VA / 480W 230V

 

USB 212P 4.05 Captainslarty 2014.01 Sees battery level, sees mains failure and actions your presets, nothing more needed, Great value Spanish company UPS. Should work on all Qnap models, all Salicru use same system I believe so good to go. Seem as good as APC to me.
SALICRU SPS ONE 700 USB TS-231P2 4.4.3.1439 WickedChild 2020.10 Works great, the only thing missing is it won't report the estimated protection time in the QTS UPS Settings.
MGE OPS Ellipse ASR 1500 USBS USB 419P, 409 3.1.1 Qnapclub fr 2009.11 -
APC APC BACK-UPS CS 350VA 230V USB

459P

ts439pro

3.2.2

3.1.2 1001t

Magebarf

Benneton

2010.01

2010.07

Detection working as it should. Still no power outage, so no actual function test yet.
APC APC BACK-UPS ES 450VA 120V USB TS-419P 3.2.5 Build 0409T Jim DeLaHunt 2010.04 419P successfully detects APC Back-UPS ES 450 unit. On test of power cut (unplugging UPS), the TS-419P shuts down as directed by the Administration interface. TS-419P estimates 1h:14m battery life on UPS normally, but on power cut this estimate drops to about 34m.
APC APC BACK-UPS ES 550VA 230V USB

219P

419P

3.1.1

3.1.1

Colinr990

NCGrimbo

2009.12

2010.02

Automatically detected by 419P. Gives 28 minutes, 7 seconds as the estimated battery life for the 419P.
APC APC UPS BE-700-IT USB 119 3.1.2 User 2009.12 -
APC APC BACK-UPS CS-650-VA USB TS-509 3.2.0 OMDB 2010.01

400 Watts.
Supplier Part No.: BK650-AS
Supplier Part Description: BK650VA 230V ASEAN
http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS

Works as advertised on TS-509 Pro. Remember to charge the battery first (8hrs as recommended by APC) before plugging it in and try using top left USB port (if it doesn't show up in the admin panel)

APC APC Back-UPS RS 550 LCD 550 Master Control (BR550GI) USB

239 Pro

 

TS-259 Pro

 

TS-219P

3.2.1 Build 1231

3.3.3 Build 0928

3.3.9 Build 0120T

Eduardo

 

Okulove

 

plexman

2010.01

 

2010.10

 

2011.02

219P detects unit automatically, reported battery life is 38 minutes (connected: TS-219P w/2HDDs Samsung EcoGreen F4, Netgear WNDR3700 WiFi-Router, external WD USB HDD, cable modem, DECT phone)

 

APC APC Back-UPS Pro 900 (BR900GI) USB

TS-439 Pro

3.4.2

Stephen

2011.05

Detected, model reported fine.  NAS has 4 x 1.5TB drives in RAID 5 and reports 153 minutes available on battery.  I have added 8-port HP network switch and ADSL router to UPS and reported time is 128 minutes.  Times as displayed on UPS LCD display.

UPS Brand, Model, Power Status, Battery level and time remaining all reported inside QNAP UI (2Hr 08Min).

APC APC Back-UPS Pro 900 (BR900GI) USB TS-259 Pro+ 3.3.9 Build 0104T Garvs 2011.08

Works fine, did a test turning power off at wall to the UPS and the TS-259 Pro+ NAS turned off 5 minutes later as setup without problem after running on the UPS battery.

Cyberpower VALUE 800EI-AU 800VA / 480W Line Interactive (Tower) USB TS669-L 4.1.0 Build 20131220 marshalleq 2014.01.10 NAS is detected correctly shortly after USB cable plugged in. Remaining battery correctly displays, autoprotection and restart works correctly.

 

 

CyberPower CP1350AVRLCD 1350 VA 810 Watts USB 809 3.2.3 Raisdead 2010.02 Reports in the Admin Panel with correct information. No power failure yet...
CyberPower

CP1500PFCLCD
PFC SINE WAVE UPS
1500VA / 1000W

USB

TVS-682
TS-453 Pro

4.4.2.1270 Mtburgard 2020.05

Have three (3) NAS systems:  2 - TVS-682 and 1 - TS-453 Pro
Connected one of the TVS-682 to the UPS via USB cable; it was sensed automatically. 
Configured this device as the UPS Master and the other two NAS systems as Slaves and all three now report a connection to the UPS.  This has been tested twice since setting this up.  All systems shutdown gracefully as expected.

https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1500pfclcd/

CyberPower DX800E-DE USB TS-659 Pro II 3.5.2 Build 1126T foxbox 2012.01

Reports correctly and both regular shutdown and 'auto-proection' mode works as intended.

Belkin F6C1500-TW-RK USB TS-453Be 4.4.2.1270 ecoen 2020.05 Manufacturer is correct, Model is detected as Belkin UPS.  Battery capacity indicates full charge, but I have a few things plugged into it and it shows 2 minutes of protection.  I haven't tested auto shutdown yet.

 

Incompatible UPS

Brand Model USB/SNMP NAS Model Firmware Reporter YYYY.MM Remark
Belkin Many   Any Any    

 

 

 

Unedited Copy from original '<a href="User%20Reported%20Compatible%20Uninterruptible%20Power%20Supplies">User Reported Compatible Uninterruptible Power Supplies</a> 'page

 

UPSes known to be working with QNAP NASes

Updated 24/03/09, Fixed bad formatting 05/05/21 (!!)

The following is a list of various UPSes that have been reported as working by users at the UPS Compatibility List topic at the QNAP Forum.

Particularly with APC UPSes, some of the UPSes have changed over time but retained the same model number, so it's important to check the SKU which uniquely identifies each model. Models listed in the Official QNAP UPS Compatibility List are included below for completeness.

If neither your NAS model nor the APC UPS model you are interested are listed, there's a strong possibility it still may work. You are best advised either to ask in the UPS topic at the QNAP Forum or contact QNAP Online Support directly before purchase.

Being linux based, QNAP software connects with usb-hid compatible UPS devices. When looking for a UPS check if the UPS device supports usb-hid. Usb-hid is also what Mac computers require to connect to UPS which may be an indication as to its compatibility. To make doubly sure, ensure your QNAP NAS supports usb-hid, such as the TS-669-L listed under UPS support at the bottom of the page here. The Cyberpower information on usb-hid for their devices is located here. More specific compatibility can be found on the usb-hid projects lookup page here.  

Working UPSes
 

Brand

SKU

Model

NAS

Notes

APC SUA1000XLI Smart-UPS 1000XLI TS-639 Pro  
APC BK350EI Back-UPS CS 350 TS-109, TS-209 Pro, TS-209 PRO II, TS-219P, TS-409 Pro  
APC BK500EI Back-UPS CS 500 TS-109 Pro, TS-209 Pro, TS-439 Pro, TS-509 Pro, TS-639 Pro  
APC BK650EI Back-UPS CS 650 TS-439 Pro  
APC BF350 Back-UPS ES 350 TS-209 Pro  
APC BF500 Back-UPS ES 500 TS-209  
APC BE450G Back-UPS ES 450VA TS-509 Pro  
APC BE550 Back-UPS ES 550VA TS-109, TS-109 Pro, TS-209, TS-409 Pro, TS-509 Pro  
APC BE700 Back-UPS ES 700VA TS-109, TS-209, TS-209 II

 

APC BR500I Back-UPS RS 500VA TS-209 Pro  
APC BR550GI Back-UPS RS 550VA TS-239 Pro  
APC BR800I Back-UPS RS 800VA TS-509 Pro, TS-639 Pro  
APC BT1000 Back-UPS HT 1000 TS-439 Pro  
APC BX900 Back-UPS XS 900VA TS-209 Pro  
APC BX900R Back-UPS XS 900VA TS-209, TS-209 Pro, TS-209 Pro II  
APC BX1200 Back-UPS XS 1200VA TS-209 Pro  
APC BX1300LCD Back-UPS XS 1300VA LCD TS-509 Pro  
APC SU700 SMART-UPS 700VA TS-109, TS-109 Pro, TS 209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro 1
APC SU725 SMART-UPS 725VA TS-419+ Pro 1
APC SUA750 SMART-UPS 750 TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro 1
APC SUA1000 SMART-UPS 1000i TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS 809 Pro 1,2
APC SUA1500 SMART-UPS 1500VA TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-209 Pro II, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro 1
APC SUA3000 SMART-UPS 3000VA TS-639 Pro 2
CyberPower   CP725AVRLCD(JP) TS-459pro 1
CyberPower   CP850AVRLCD TS-109 II 3
CyberPower   CP1350EAVRLCD TS-639 PRO  
MGE   Ellipse Premium 500 TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro 1
MGE   EM 600 TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-800U-PR, TS-809 Pro 1

 

Notes:

 

1. Appears on the Official QNAP UPS Compatibility List

2. SNMP feature reported to be not working

3. From V3.0.0 Build 0121T firmware