Add items to crontab

From QNAPedia
Revision as of 18:15, 26 October 2015 by Glenn (talk | contribs) (catchg)
Jump to navigation Jump to search

Background

Skills required

You must be able to connect to your qnap using telnet and edit using vi.

crontab

The crontab can be used to execute tasks (scripts) based on a reoccuring schedule; by default the crontab is used, for example, to restart the webserver during the night.

To view the content of the crontab, login to your qnap using telnet and type:

crontab -l

You will see a (small) list of crontab entries.

Editing the crontab is also easy, on the console type:

crontab -e

The crontab will be shown inside a vi session. Edit the crontab as you wish.

Once you have edited the crontab, execute the following to activate it:

/etc/init.d/crond.sh restart

See Cron on Wikipedia

Stock crontab jobs

When using crontab -l on a default QNAP, QNAPs has some default crontab jobs.

Usually you will want to know, what default jobs are running on the QNAP based on schedule.

The following table is meant to bring some light into those built-in jobs.The list is by no means complete, jobs may depend on the firmware version, start times may vary. If you find a job on your QNAP, that is missing in the table, add it. The list could help to identify unwanted jobs on the QNAP that regularly wake up your harddisk(s).

Default Time
Job
Explanation
0 4 * * * /sbin/hwclock -s http://linux.die.net/man/8/hwclock
0 3 * * * /sbin/vs_refresh vs_refresh is for share folder space usage calculation (for Network Share Management)
0 3 * * 0 /etc/init.d/idmap.sh dump related to SAMBA Active Directory configuration. Used if security is set to ADS.
0 3 * * * /sbin/clean_reset_pwd (unclear) might be the new behaviour of the network recycle bin (purging files after a certain amount of days)
0-59/15 * * * * /etc/init.d/nss2_dusg.sh is a job of the Surveillance Station
10 15 * * * /usr/bin/power_clean -c 2>/dev/null  ?
4 3 * * 3 /etc/init.d/backup_conf.sh does an automatic backup of several config files in /etc/config.
0 3 * * *
/bin/rm -rf /mnt/HDA_ROOT/twonkymedia/twonkymedia.db/cache/*
Will clear the Twonky media cache
5 0 * * 1
/etc/init.d/antivirus.sh scan 1
If Antivirus is enabled, this will scan the files for viruses
0 0 * * *
/etc/init.d/antivirus.sh archive_log
If Antivirus report jobs are enabled
0 0 */1 * *
/etc/init.d/antivirus.sh update_db
If Antivirus is enabled, this will check  clamav.net for updates

/etc/init.d/startup
If a restart/powerof job is configured in power management

/etc/init.d/poweroff
If a restart/powerof job is configured in power management


Method 1: /etc/config/crontab

Edit /etc/config/crontab directly, then tell the cron service to reload the crontab. These changes will persist past a reboot so be careful!

Here is an example which assumes you are ssh'd / telnet'd into your nas (as admin).

echo "1 4 * * * /share/custom/scripts/custom1.sh" >> /etc/config/crontab
echo "40 5 * * * /share/custom/scripts/custom2.sh" >> /etc/config/crontab
crontab /etc/config/crontab

Method 2: autorun.sh

Some peoples have reported this method as the working method and others have reported that this does not. Perhaps it is an outdated way to add cron jobs.


Editing the crontab directly using 'crontab -e' as described above is possible on the QNAPs and it will function as expected. However as soon as your QNAP is restarted, you will be surprised to learn that all your custom entries will be gone from the crontab!


To prevent the loss of your work, use Autorun.sh or AutoRunMaster and a custom script for changing the crontab:

#!/bin/sh
# location: /share/custom/scripts/contab.sh
# script name: crontab script
# purpose: add entries to the crontab, which will survive a QNAP reboot
# designed for Qnap TS-201
tmpfile=/tmp/crontab.tmp

# read crontab and remove custom entries (usually not there since after a reboot
# QNAP restores to default crontab:
crontab -l | grep -vi "custom1.sh" | grep -vi "custom2.sh" > $tmpfile

# add custom entries to crontab
echo "1 4 * * * /share/custom/scripts/custom1.sh" >> $tmpfile
echo "40 5 * * * /share/custom/scripts/custom2.sh" >> $tmpfile

#load crontab from file
crontab $tmpfile

# remove temporary file
rm $tmpfile

# restart crontab
/etc/init.d/crond.sh restart

Make sure your script is called when the qnap is started by adding it to Autorun.sh or by using AutoRunMaster


Method 1 bis:  /etc/config/crontab, load and restart 

In a post on http://forum.qnap.com/viewtopic.php?f=144&t=32519&p=253371#p253371 Micke writes :


Don't bother with that kind of script at all. Whenever you add a custom entry then follow this procedure

1. Edit /etc/config/crontab and add your custom entry.
2. Run 'crontab /etc/config/crontab' to load the changes.
3. Restart cron, i.e. '/etc/init.d/crond.sh restart'

If you follow this procedure then the changes survive a reboot (even a firmware upgrade), i.e. no need for any script to restore them.

/Mike

Tested on 3.6.0 : works fine.