Compatible/Incompatible UPS
Compatible UPS
Brand | Model | USB/SNMP | NAS Model | Firmware | Reporter | YYYY.MM | Remark |
---|---|---|---|---|---|---|---|
SALICRU |
SPS ONE 900 900VA / 480W 230V
|
USB | 212P | 4.05 | Captainslarty | 2014.01 | Sees battery level, sees mains failure and actions your presets, nothing more needed, Great value Spanish company UPS. Should work on all Qnap models, all Salicru use same system I believe so good to go. Seem as good as APC to me. |
MGE OPS | Ellipse ASR 1500 USBS | USB | 419P, 409 | 3.1.1 | Qnapclub fr | 2009.11 | - |
APC | APC BACK-UPS CS 350VA 230V | USB |
459P ts439pro |
3.2.2 3.1.2 1001t |
Magebarf Benneton |
2010.01 2010.07 |
Detection working as it should. Still no power outage, so no actual function test yet. |
APC | APC BACK-UPS ES 450VA 120V | USB | TS-419P | 3.2.5 Build 0409T | Jim DeLaHunt | 2010.04 | 419P successfully detects APC Back-UPS ES 450 unit. On test of power cut (unplugging UPS), the TS-419P shuts down as directed by the Administration interface. TS219P estimates 1h:14m battery life on UPS normally, but on power cut this estimate drops to about 34m. |
APC | APC BACK-UPS ES 550VA 230V | USB |
219P 419P |
3.1.1 3.1.1 |
Colinr990 NCGrimbo |
2009.12 2010.02 |
Automatically detected by 419P. Gives 28 minutes, 7 seconds as the estimated battery life for the 419P. |
APC | APC UPS BE-700-IT | USB | 119 | 3.1.2 | User | 2009.12 | - |
APC | APC BACK-UPS CS-650-VA | USB | 509 | 3.2.0 | OMDB | 2010.01 |
400 Watts. |
APC | APC Back-UPS RS 550 LCD 550 Master Control (BR550GI) | USB |
239 Pro
TS-259 Pro
TS-219P |
3.2.1 Build 1231 3.3.3 Build 0928 3.3.9 Build 0120T |
Eduardo
Okulove
plexman |
2010.01
2010.10
2011.02 |
– – 219P detects unit automatically, reported battery life is 38 minutes (connected: TS-219P w/2HDDs Samsung EcoGreen F4, Netgear WNDR3700 WiFi-Router, external WD USB HDD, cable modem, DECT phone)
|
APC | APC Back-UPS Pro 900 (BR900GI) | USB |
TS-439 Pro |
3.4.2 |
Stephen |
2011.05 |
Detected, model reported fine. NAS has 4 x 1.5TB drives in RAID 5 and reports 153 minutes available on battery. I have added 8-port HP network switch and ADSL router to UPS and reported time is 128 minutes. Times as displayed on UPS LCD display. UPS Brand, Model, Power Status, Battery level and time remaining all reported inside QNAP UI (2Hr 08Min). |
APC | APC Back-UPS Pro 900 (BR900GI) | USB | TS-259 Pro+ | 3.3.9 Build 0104T | Garvs | 2011.08 |
Works fine, did a test turning power off at wall to the UPS and the TS-259 Pro+ NAS turned off 5 minutes later as setup without problem after running on the UPS battery. |
Cyberpower | VALUE 800EI-AU 800VA / 480W Line Interactive (Tower) | USB | TS669-L | 4.1.0 Build 20131220 | marshalleq | 2014.01.10 | NAS is detected correctly shortly after USB cable plugged in. Remaining battery correctly displays, autoprotection and restart works correctly.
|
CyberPower | CP1350AVRLCD 1350 VA 810 Watts | USB | 809 | 3.2.3 | Raisdead | 2010.02 | Reports in the Admin Panel with correct information. No power failure yet... |
CyberPower |
DX800E-DE |
USB |
TS-659 Pro II |
3.5.2 Build 1126T |
foxbox |
2012.01 |
Reports correctly and both regular shutdown and 'auto-proection' mode works as intended. |
Incompatible UPS
Brand | Model | USB/SNMP | NAS Model | Firmware | Reporter | YYYY.MM | Remark |
---|---|---|---|---|---|---|---|
Belkin | Any | Any | Any |
|
Unedited Copy from original 'User Reported Compatible Uninterruptible Power Supplies 'page
UPSes known to be working with QNAP NASes
Updated 24/03/09
Brand |
SKU |
Model |
NAS |
Notes |
APC | SUA1000XLI | Smart-UPS 1000XLI | TS-639 Pro | |
APC | BK350EI | Back-UPS CS 350 | TS-109, TS-209 Pro, TS-209 PRO II, TS-219P, TS-409 Pro | |
APC | BK500EI | Back-UPS CS 500 | TS-109 Pro, TS-209 Pro, TS-439 Pro, TS-509 Pro, TS-639 Pro | |
APC | BK650EI | Back-UPS CS 650 | TS-439 Pro | |
APC | BF350 | Back-UPS ES 350 | TS-209 Pro | |
APC | BF500 | Back-UPS ES 500 | TS-209 | |
APC | BE450G | Back-UPS ES 450VA | TS-509 Pro |
|
APC | BE550 | Back-UPS ES 550VA | TS-109, TS-109 Pro, TS-209, TS-409 Pro, TS-509 Pro |
|
APC | BE700 | Back-UPS ES 700VA | TS-109, TS-209, TS-209 II |
|
APC | BR500I | Back-UPS RS 500VA | TS-209 Pro | |
APC | BR550GI | Back-UPS RS 550VA | TS-239 Pro | |
APC | BR800I | Back-UPS RS 800VA | TS-509 Pro, TS-639 Pro | |
APC | BT1000 | Back-UPS HT 1000 | TS-439 Pro | |
APC | BX900 | Back-UPS XS 900VA | TS-209 Pro | |
APC | BX900R | Back-UPS XS 900VA | TS-209, TS-209 Pro, TS-209 Pro II | |
APC | BX1200 | Back-UPS XS 1200VA | TS-209 Pro | |
APC | BX1300LCD | Back-UPS XS 1300VA LCD | TS-509 Pro | |
APC | SU700 | SMART-UPS 700VA |
TS-109, TS-109 Pro, TS 209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro | 1 |
APC | SU725 | SMART-UPS 725VA |
TS-419+ Pro | 1 |
APC | SUA750 | SMART-UPS 750 | TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro | 1 |
APC | SUA1000 | SMART-UPS 1000i | TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS 809 Pro | 1,2 |
APC | SUA1500 | SMART-UPS 1500VA | TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-209 Pro II, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro |
1 |
APC | SUA3000 | SMART-UPS 3000VA | TS-639 Pro | 2 |
CyberPower | CP725AVRLCD(JP) | TS-459pro | 1 | |
CyberPower | CP850AVRLCD | TS-109 II | 3 | |
CyberPower | CP1350EAVRLCD | TS-639 PRO | ||
MGE | Ellipse Premium 500 | TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro | 1 | |
MGE | EM 600 | TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-800U-PR, TS-809 Pro | 1 | |
Notes: |
1. Appears on the Official QNAP UPS Compatibility List 2. SNMP feature reported to be not working 3. From V3.0.0 Build 0121T firmware
|
</blockquote>