Compatible/Incompatible UPS

 

Compatible UPS

Brand	Model	USB/SNMP	NAS Model	Firmware	Reporter	YYYY.MM	Remark
SALICRU	SPS ONE 900 900VA / 480W 230V	USB	212P	4.05	Captainslarty	2014.01	Sees battery level, sees mains failure and actions your presets, nothing more needed, Great value Spanish company UPS. Should work on all Qnap models, all Salicru use same system I believe so good to go. Seem as good as APC to me.
SALICRU	SPS ONE 700	USB	TS-231P2	4.4.3.1439	WickedChild	2020.10	Works great, the only thing missing is it won't report the estimated protection time in the QTS UPS Settings.
MGE OPS	Ellipse ASR 1500 USBS	USB	419P, 409	3.1.1	Qnapclub fr	2009.11	-
APC	APC BACK-UPS CS 350VA 230V	USB	459P ts439pro	3.2.2 3.1.2 1001t	Magebarf Benneton	2010.01 2010.07	Detection working as it should. Still no power outage, so no actual function test yet.
APC	APC BACK-UPS ES 450VA 120V	USB	TS-419P	3.2.5 Build 0409T	Jim DeLaHunt	2010.04	419P successfully detects APC Back-UPS ES 450 unit. On test of power cut (unplugging UPS), the TS-419P shuts down as directed by the Administration interface. TS-419P estimates 1h:14m battery life on UPS normally, but on power cut this estimate drops to about 34m.
APC	APC BACK-UPS ES 550VA 230V	USB	219P 419P	3.1.1 3.1.1	Colinr990 NCGrimbo	2009.12 2010.02	Automatically detected by 419P. Gives 28 minutes, 7 seconds as the estimated battery life for the 419P.
APC	APC UPS BE-700-IT	USB	119	3.1.2	User	2009.12	-
APC	APC BACK-UPS CS-650-VA	USB	TS-509	3.2.0	OMDB	2010.01	400 Watts. Supplier Part No.: BK650-AS Supplier Part Description: BK650VA 230V ASEAN http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BK650%2DAS Works as advertised on TS-509 Pro. Remember to charge the battery first (8hrs as recommended by APC) before plugging it in and try using top left USB port (if it doesn't show up in the admin panel)
APC	APC Back-UPS RS 550 LCD 550 Master Control (BR550GI)	USB	239 Pro   TS-259 Pro   TS-219P	3.2.1 Build 1231 3.3.3 Build 0928 3.3.9 Build 0120T	Eduardo   Okulove   plexman	2010.01   2010.10   2011.02	– – 219P detects unit automatically, reported battery life is 38 minutes (connected: TS-219P w/2HDDs Samsung EcoGreen F4, Netgear WNDR3700 WiFi-Router, external WD USB HDD, cable modem, DECT phone)
APC	APC Back-UPS Pro 900 (BR900GI)	USB	TS-439 Pro	3.4.2	Stephen	2011.05	Detected, model reported fine.  NAS has 4 x 1.5TB drives in RAID 5 and reports 153 minutes available on battery.  I have added 8-port HP network switch and ADSL router to UPS and reported time is 128 minutes.  Times as displayed on UPS LCD display. UPS Brand, Model, Power Status, Battery level and time remaining all reported inside QNAP UI (2Hr 08Min).
APC	APC Back-UPS Pro 900 (BR900GI)	USB	TS-259 Pro+	3.3.9 Build 0104T	Garvs	2011.08	Works fine, did a test turning power off at wall to the UPS and the TS-259 Pro+ NAS turned off 5 minutes later as setup without problem after running on the UPS battery.
Cyberpower	VALUE 800EI-AU 800VA / 480W Line Interactive (Tower)	USB	TS669-L	4.1.0 Build 20131220	marshalleq	2014.01.10	NAS is detected correctly shortly after USB cable plugged in. Remaining battery correctly displays, autoprotection and restart works correctly.
CyberPower	CP1350AVRLCD 1350 VA 810 Watts	USB	809	3.2.3	Raisdead	2010.02	Reports in the Admin Panel with correct information. No power failure yet...
CyberPower	CP1500PFCLCD PFC SINE WAVE UPS 1500VA / 1000W	USB	TVS-682 TS-453 Pro	4.4.2.1270	Mtburgard	2020.05	Have three (3) NAS systems:  2 - TVS-682 and 1 - TS-453 Pro Connected one of the TVS-682 to the UPS via USB cable; it was sensed automatically.  Configured this device as the UPS Master and the other two NAS systems as Slaves and all three now report a connection to the UPS.  This has been tested twice since setting this up.  All systems shutdown gracefully as expected. https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1500pfclcd/
CyberPower	DX800E-DE	USB	TS-659 Pro II	3.5.2 Build 1126T	foxbox	2012.01	Reports correctly and both regular shutdown and 'auto-proection' mode works as intended.
Belkin	F6C1500-TW-RK	USB	TS-453Be	4.4.2.1270	ecoen	2020.05	Manufacturer is correct, Model is detected as Belkin UPS.  Battery capacity indicates full charge, but I have a few things plugged into it and it shows 2 minutes of protection.  I haven't tested auto shutdown yet.

 

Incompatible UPS

Brand	Model	USB/SNMP	NAS Model	Firmware	Reporter	YYYY.MM	Remark
Belkin	Many		Any	Any

 

 

Unedited Copy from original '<a href="User%20Reported%20Compatible%20Uninterruptible%20Power%20Supplies">User Reported Compatible Uninterruptible Power Supplies</a> 'page

 

UPSes known to be working with QNAP NASes

Updated 24/03/09, Fixed bad formatting 05/05/21 (!!)

The following is a list of various UPSes that have been reported as working by users at the UPS Compatibility List topic at the QNAP Forum.

Particularly with APC UPSes, some of the UPSes have changed over time but retained the same model number, so it's important to check the SKU which uniquely identifies each model. Models listed in the Official QNAP UPS Compatibility List are included below for completeness.

If neither your NAS model nor the APC UPS model you are interested are listed, there's a strong possibility it still may work. You are best advised either to ask in the UPS topic at the QNAP Forum or contact QNAP Online Support directly before purchase.

Being linux based, QNAP software connects with usb-hid compatible UPS devices. When looking for a UPS check if the UPS device supports usb-hid. Usb-hid is also what Mac computers require to connect to UPS which may be an indication as to its compatibility. To make doubly sure, ensure your QNAP NAS supports usb-hid, such as the TS-669-L listed under UPS support at the bottom of the page here. The Cyberpower information on usb-hid for their devices is located here. More specific compatibility can be found on the usb-hid projects lookup page here.  

Working UPSes
 

Brand	SKU	Model	NAS	Notes
APC	SUA1000XLI	Smart-UPS 1000XLI	TS-639 Pro
APC	BK350EI	Back-UPS CS 350	TS-109, TS-209 Pro, TS-209 PRO II, TS-219P, TS-409 Pro
APC	BK500EI	Back-UPS CS 500	TS-109 Pro, TS-209 Pro, TS-439 Pro, TS-509 Pro, TS-639 Pro
APC	BK650EI	Back-UPS CS 650	TS-439 Pro
APC	BF350	Back-UPS ES 350	TS-209 Pro
APC	BF500	Back-UPS ES 500	TS-209
APC	BE450G	Back-UPS ES 450VA	TS-509 Pro
APC	BE550	Back-UPS ES 550VA	TS-109, TS-109 Pro, TS-209, TS-409 Pro, TS-509 Pro
APC	BE700	Back-UPS ES 700VA	TS-109, TS-209, TS-209 II
APC	BR500I	Back-UPS RS 500VA	TS-209 Pro
APC	BR550GI	Back-UPS RS 550VA	TS-239 Pro
APC	BR800I	Back-UPS RS 800VA	TS-509 Pro, TS-639 Pro
APC	BT1000	Back-UPS HT 1000	TS-439 Pro
APC	BX900	Back-UPS XS 900VA	TS-209 Pro
APC	BX900R	Back-UPS XS 900VA	TS-209, TS-209 Pro, TS-209 Pro II
APC	BX1200	Back-UPS XS 1200VA	TS-209 Pro
APC	BX1300LCD	Back-UPS XS 1300VA LCD	TS-509 Pro
APC	SU700	SMART-UPS 700VA	TS-109, TS-109 Pro, TS 209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro	1
APC	SU725	SMART-UPS 725VA	TS-419+ Pro	1
APC	SUA750	SMART-UPS 750	TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-RP, TS-809 Pro	1
APC	SUA1000	SMART-UPS 1000i	TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS 809 Pro	1,2
APC	SUA1500	SMART-UPS 1500VA	TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-209 Pro II, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro	1
APC	SUA3000	SMART-UPS 3000VA	TS-639 Pro	2
CyberPower		CP725AVRLCD(JP)	TS-459pro	1
CyberPower		CP850AVRLCD	TS-109 II	3
CyberPower		CP1350EAVRLCD	TS-639 PRO
MGE		Ellipse Premium 500	TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-809U-PR, TS-809 Pro	1
MGE		EM 600	TS-109, TS-109 Pro, TS-209, TS-209 Pro, TS-409, TS-409 Pro, TS-509 Pro, TS-639 Pro, TS-800U-PR, TS-809 Pro	1
Notes:	1. Appears on the Official QNAP UPS Compatibility List 2. SNMP feature reported to be not working 3. From V3.0.0 Build 0121T firmware