Filesystem not clean: Difference between revisions
Revise model list table |
No edit summary |
||
| Line 89: | Line 89: | ||
If you encountered problems to run the filesystem check, like failed to umount volume, you may try to stop all qpkg services in AppCenter like below.<br/>[[File:Qpkg off.png|851x369px|Qpkg off.png]]<br/><br/>And reboot the NAS. Then run the filesystem check again. | If you encountered problems to run the filesystem check, like failed to umount volume, you may try to stop all qpkg services in AppCenter like below.<br/>[[File:Qpkg off.png|851x369px|Qpkg off.png]]<br/><br/>And reboot the NAS. Then run the filesystem check again. | ||
---- | |||
Please extract the | If you still have the same issue after the file system check and reboot properly, you can download and apply the SafeShutdown QFix to your NAS.<br/>This QFix is to make file system in safe/clean status when shutting down the system. Please be aware below information.<br/>1. This QFix can be applied on the QTS version 4.2.0 or later version.<br/>2. It is not necessary to apply this QFix after next official QTS firmware release. (after build20160114) | ||
After downloading it, please extract the file and then update this QFix via the firmware update page. | |||
Download link: | Download link: | ||
Latest revision as of 08:33, 15 January 2016
This message, "The file system is not clean, please..." is to notice the user to do the file system check to make sure the data integrity. Generally, it happens when the data volume is not un-mounted properly. It could be:
- The abnormal shutdown or force power off the NAS.
- Some services are not stopped properly during the shutdown.
- Other unexpected cases cause the data volume is not un-mounted properly.
There are two series of NAS, legacy and HAL models and there are some differences in the web GUI of the storage management. You can refer to below screenshots to find the proper one for you.
Legacy Models
| Bay Number | Model Name |
|---|---|
| 1-Bay | TS-110, TS-112, TS-112P, TS-119, TS-119P+, TS-119P II, TS-120, TS-121 |
| 2-Bay | TS-210, TS-212, TS-212-E, TS-212P, TS-219, TS-219P, TS-219P+, TS-219P II, TS-220, TS-221, TS-239 Pro, TS-239 Pro II, TS-239 Pro II+, TS-259 Pro, TS-259 Pro+, HS-210, TS-269H |
| 4-Bay | TS-410, TS-410U, TS-412, TS-412U, TS-419P, TS-419P+, TS-419P II, TS-419U, TS-419U+, TS-419U II, TS-420, TS-420U, TS-421, TS-421U, TS-439 Pro, TS-439 Pro II, TS-439 Pro II+, TS-439U-RP/SP, TS-459 Pro, TS-459 Pro II, TS-459 Pro+, TS-459U-RP/SP, TS-459U-RP+/SP+ |
| 5-Bay | TS-509 Pro, TS-559 Pro, TS-559 Pro+, TS-559 Pro II |
| 6-Bay | TS-639 Pro, TS-659 Pro, TS-659 Pro+, TS-659 Pro II |
| 8-Bay | TS-809 Pro, TS-809U-RP, TS-859 Pro, TS-859U-RP+, TS-859 Pro+, TS-859U-RP, SS-439 Pro, SS-839 Pro |
Please login QTS web page and go to Control Panel --> System Settings --> Storage Management --> Volume Management. Click on [Check File System] button to start the file system check.
HAL Models
| Bay Number | Model Name |
|---|---|
| 1-Bay | TS-131, TS-128 |
| 2-Bay | TS-231, TS-231+, TS-251, TS-251+, HS-251, HS-251+, TS-253A, TS-253 Pro, TS-251C, TS-269L, TS-269 Pro, TS-228 |
| 4-Bay | TS-431, TS-431U, TS-431+, TS-451, TS-451+, TS-451S, TS-451U, TS-453A, TS-453S Pro, TS-453 Pro, TS-463U, TS-463U-RP, TS-469 Pro, TS-469L, TS-469U-RP, TS-469U-SP, TS-470, TS-470U-RP, TS-470U-SP, TS-470 Pro, TVS-463, TVS-471, TVS-471U, TVS-471U-RP, TS-453U, TS-453U-RP, TS-453mini, IS-453S |
| 5-Bay | TS-569 Pro, TS-569L, TS-563 |
| 6-Bay | TS-651, TS-653A, TS-653 Pro, TS-669 Pro, TS-669L, TS-670 Pro, TS-670, TVS-663, TVS-671 |
| 8-Bay | TS-851, TS-853A , TS-853 Pro, TS-853S Pro, TS-853U, TS-853U-RP, TS-863U, TS-863U-RP, TS-869 Pro, TS-869L, TS-869U-RP, TS-870 Pro, TS-870, TS-870U-RP, TS-879 Pro, TS-879U-RP, TVS-EC880, TVS-871, TVS-871U-RP, TVS-863, TVS-863+, TS-EC880U-RP, TS-EC880 Pro, TS-EC879U-RP |
| 10-Bay | TS-1079 Pro, TVS-EC1080+, TVS-EC1080, TS-EC1080 Pro |
| 12-Bay | TS-1253U, TS-1253U-RP, TS-1263U, TS-1263U-RP, TS-1269U-RP, TS-1270U-RP, TVS-1271U-RP, TS-1279U-RP, TS-EC1279U-RP, TS-EC1279U-SAS-RP, SS-EC1279U-SAS-RP, TS-EC1280U-RP, TVS-EC1280U-SAS-RP |
| 15-Bay | TVS-EC1580U-SAS-RP |
| 16-Bay | TS-1679U-RP, TS-EC1679U-RP, TS-EC1679U-SAS-RP, TS-EC1680U-RP, TVS-EC1680U-SAS-RP |
| 18-Bay | SS-EC1879U-SAS-RP |
| 24-Bay | SS-EC2479U-SAS-RP, TS-EC2480U-RP, TVS-EC2480U-SAS-RP |
Please login QTS web page and go to Control Panel --> System Settings --> Storage Management --> Storage Space. At the right panel, please click on the storage pool to expand it. Select on the data volume and click [Manage] button. It will popup the data volume management dialog. Click [Actions] button and select Check File System to start the file system check.
If you encountered problems to run the filesystem check, like failed to umount volume, you may try to stop all qpkg services in AppCenter like below.
And reboot the NAS. Then run the filesystem check again.
If you still have the same issue after the file system check and reboot properly, you can download and apply the SafeShutdown QFix to your NAS.
This QFix is to make file system in safe/clean status when shutting down the system. Please be aware below information.
1. This QFix can be applied on the QTS version 4.2.0 or later version.
2. It is not necessary to apply this QFix after next official QTS firmware release. (after build20160114)
After downloading it, please extract the file and then update this QFix via the firmware update page.
Download link: